Grade 1 pure titanium double wall coffee cup, 150 ml / 5.07 fl oz, for wholesale and OEM supply.
Contact us for samples, bulk pricing, and OEM inquiry.
Grade 1 pure titanium double wall coffee cup, 150 ml / 5.07 fl oz capacity, available in two configurations at 46 g and 52 g net weight. Factory-direct supply for wholesale buyers, importers, and specialty coffee or outdoor brands; OEM laser engraving and anodized color finishing accepted from MOQ 100 pcs. This model fits a full titanium drinkware line covering espresso and cortado formats (100–300 ml) through travel mug sizes (350–600 ml).
| Specification | Details |
|---|---|
| Material | Pure Titanium Grade 1 |
| Capacity | 150 ml / 5.07 fl oz |
| Weight | 46 g / 52 g (two configurations — specify at inquiry) |
| Dimensions | Approx. Ø63–68 × H62–70 mm (contact for exact drawing) |
| Wall Type | Double Wall (air gap; vacuum-sealed upgrade available) |
| Finish Options | Natural Silver / Matte (Frosted) / Mirror Polished / Anodized Color |
| Color Options | Silver / Blue / Green / Red / Purple / Yellow (anodized); Pantone ref. accepted |
| Special Feature | Anti-scald exterior, no-coating food contact surface |
| MOQ | 100 pcs (standard finish); 500 pcs (OEM custom logo / custom color) |
| Lead Time | 15–30 days (bulk production) |
Pure Titanium Grade 1 drinkware is cold-pressed from 0.4–0.6 mm titanium sheet, selected for its formability in thin-wall cup geometry. Grade 1 contains ≥99.5% titanium with no alloying elements, making it the standard specification for food-contact cups where chemical inertness and taste neutrality are required — the material transfers no metallic compounds into liquid under normal use conditions.
At 4.51 g/cm³, Grade 1 titanium runs approximately 43% lighter than 304 stainless steel at 7.93 g/cm³. For a 150 ml double wall cup body, that density difference directly produces the 46–52 g weight range — a measurable advantage for outdoor brands, café merchandise programs, and airline or travel-format gift sets where per-unit weight and packed density matter.
The double wall structure consists of two cold-pressed titanium shells, assembled and rim-welded into an air-gap cavity. A vacuum-sealed double wall option (air evacuated from the inter-wall space) is available for buyers requiring extended thermal retention; non-vacuum double wall delivers anti-scald exterior temperature and moderate insulation sufficient for espresso service. Wall surfaces accept matte bead-blasting, mirror polishing, and anodizing without affecting the food-contact inner surface.
| Parameter | Standard | OEM Custom |
|---|---|---|
| MOQ | 100 pcs | 500 pcs |
| Sample lead time | 7–10 business days | 7–10 business days |
| Bulk lead time | 15–30 days | 15–30 days |
| Payment | T/T 30% deposit + balance against B/L copy | T/T 30% deposit + balance against B/L copy |
| L/C | At sight, for qualified importers | At sight, for qualified importers |
This 150 ml format maps to several B2B procurement verticals where single-serve, small-capacity drinkware is the target specification:
Q: What is the difference between the 46 g and 52 g weight configurations?
The two figures correspond to distinct configurations available from the factory — typically cup body alone versus cup body with an optional lid or secondary component. Procurement teams should specify the required configuration at the inquiry stage; a dimensional drawing and weight breakdown for each variant is available on request.
Q: What is the difference between Grade 1 and Grade 2 titanium for this cup?
Grade 1 (≥99.5% Ti, no alloying elements) is the standard for thin-wall food-contact drinkware due to its cold-pressing formability and chemical inertness. Grade 2 has slightly higher tensile strength (345 MPa vs 240 MPa) and is used where structural rigidity is prioritized over minimum weight. Both grades are available; buyers should specify based on wall thickness and end-use requirements.
Q: Can the anodized color be matched to a specific Pantone code?
The six standard anodized channels (Silver, Blue, Green, Red, Purple, Yellow) are produced to fixed electrochemical parameters. For Pantone-matched custom channels, the factory submits a tolerance sample for buyer approval before bulk production begins. MOQ for custom color channels is 500 pcs. RAL code references are also accepted. Lead time for initial sample approval adds 7–10 business days.
Q: What is the MOQ for private label packaging?
Cup supply without custom branding starts at MOQ 100 pcs. OEM laser engraving or custom anodized color: MOQ 500 pcs. Full private label configuration (custom retail carton + insert + logo): MOQ 500 pcs, with an additional 7–10 business days for packaging print approval before bulk production.
Q: Does double wall construction require vacuum sealing?
The standard double wall uses an air-gap cavity between the two titanium shells. This provides anti-scald exterior temperature and moderate thermal retention. A vacuum-sealed variant (air evacuated from the inter-wall gap) is available and improves heat retention further; brands and importers should specify vacuum or non-vacuum at the inquiry stage, as the two constructions have different pricing and tooling requirements.
Q: What file format is required for OEM laser logo engraving?
Vector format is required — EPS, AI (Adobe Illustrator), or SVG. The factory cannot process raster files (JPEG, PNG) for engraving. Logo placement, engraving area dimensions, and line weight minimums are confirmed at the sampling stage. A digital mock-up is provided before physical samples are produced.
Q: Is this cup compatible with standard café espresso output volumes?
150 ml is consistent with the standard double espresso (approximately 60 ml of espresso) with room for milk or foam for cortado and flat white formats. Coffee equipment brands, café chains, and specialty roasters sourcing branded drinkware kits typically specify this size range for single-serve menu items.
All customization options available for bulk orders. Contact our export team for detailed specifications and pricing.
Laser engraving of logos, text, and graphics directly onto the titanium surface. Permanent, precise, and available from 100 pcs per design.
Electrochemical anodizing in a range of colors. Food-safe, no coating or paint involved. Available in 6 standard colors plus custom matching from 100 pcs.
Full OEM packaging design service covering retail boxes, pouches, hang-tags, and insert cards. We work with your brand guidelines to produce shelf-ready packaging for retail, e-commerce, and gifting markets. Includes barcode setup, product photography coordination, and export carton configuration for bulk shipments.
Tell us about your sourcing needs. Our sales engineers will get back to you within 12 hours.
