Titanium Multi-Function EDC Crowbar

Grade 5 titanium (Ti-6Al-4V) multi-function EDC crowbar, 143mm length and 84.6g, combining pry bar, window breaker, bottle opener, can opener, and interchangeable Phillips/flathead screwdriver bits in a single sandblasted titanium body. Available for wholesale from MOQ 50 pcs; custom laser engraving, surface finish variants, and private label packaging accepted from MOQ 500 pcs. Part of a full titanium EDC tools line covering pry bars, multi-tools, pocket clips, and keychain accessories.

Quick Specs

Material & Manufacturing

The Ta6805 crowbar body is CNC machined from Grade 5 titanium billet (Ti-6Al-4V). At a tensile strength of 900–1,000 MPa, Grade 5 handles the leverage loads a multi-function pry bar encounters — nail pulling, lid prying, emergency window breaking — without permanent deformation that would occur in Grade 2 pure titanium (345 MPa) at the same cross-section.

At 4.43 g/cm³, the titanium body comes in approximately 44% lighter than a stainless steel tool of the same geometry (~7.9 g/cm³). The net weight of 84.6g reflects the full machined body including the integrated bit socket, bottle opener notch, and window breaker tip — not a hollow or stamped construction.

The sandblasted surface finish is applied post-machining across the full body, providing a uniform matte-gray texture that suppresses glare and reduces fingerprint accumulation in daily carry. The integrated 1/4″ hex bit socket accepts standard 25mm screwdriver bits, making the tool compatible with any off-the-shelf bit set — a practical feature for outdoor brand buyers positioning the product as a field repair tool.

The window breaker tip uses a hardened ceramic or tungsten bead insert at the squared tip end — a specification procurement teams should confirm per unit before retail distribution, as material affects breakage force rating and product liability classification by market.

OEM & Customization

Stock inventory in sandblasted Grade 5 titanium is available from MOQ 50 pcs. The following customization options are supported:

Surface Finish Options:

• Sand Blasting — standard matte-gray, anti-fingerprint; suited to outdoor, tactical, and EDC retail channels
• Stone Wash — tumble-finished, subtle texture variation; suits lifestyle EDC and premium gift channels
• Titanium Burn / Heat Anodized — blue-gold-purple gradient heat treatment; suited to collector and limited-edition EDC brand SKUs
• Natural Machined — bare CNC finish without post-treatment; available for brands preferring raw titanium aesthetics

OEM / ODM Capabilities:

• Laser engraving: brand logo or text on flat face panel (vector file / AI or DXF required)
• Custom surface finish per above options (Pantone reference accepted for anodized variants)
• Custom packaging: OPP bag (standard), retail hang-tag card, kraft gift box, private label insert
• Bit set customization: additional bit types or branded bit storage pouch
• Full EDC line sourcing: companion pry bars, pocket clips, keychains, titanium drinkware available

Procurement Timeline:

• Sample lead time: 7–10 days
• Bulk production lead time: 15–30 days
• MOQ: 50 pcs (standard stock finish); 500 pcs (custom logo / custom surface finish)
• Payment terms: T/T 30% deposit, balance before shipment; L/C available for orders above 5,000 pcs

Applications

The Ta6805 targets five procurement channels:

• EDC & Everyday Carry Brands — The 1/4″ interchangeable bit system and multi-function profile position this as a premium SKU for DTC EDC brands selling through Amazon, specialty carry retailers, and Kickstarter/crowdfunding channels where tool versatility is a core purchase trigger.
• Outdoor & Camping Gear Distributors — The combination of pry bar, can opener, and screwdriver bits makes the tool a practical bundling item alongside titanium cookware and camp cup sets for outdoor distributors.
• Tactical & Survival Supply — The window breaker tip and structural Grade 5 titanium construction meet the spec expectations of tactical gear buyers sourcing personal safety tools for law enforcement, military, and preparedness markets.
• Automotive & Travel Accessories — The window breaker function is a primary stocking reason for buyers serving the in-car emergency kit and travel safety accessory segment.
• Corporate & Promotional Gift Buyers — Laser-engraved titanium multi-tools are a high-perceived-value choice for B2B gift procurement and trade show items where recipients keep and use the product long-term.

FAQ

Q1: What grade titanium is used, and does it affect the window breaker performance?
The body is Grade 5 titanium (Ti-6Al-4V), with tensile strength of 900–1,000 MPa. The window breaker tip is a separate hardened insert (ceramic bead or tungsten, confirm with supplier per order). The titanium body itself does not break glass — the insert does. Procurement teams distributing into markets with product liability requirements should request the insert material specification sheet before placing bulk orders.

Q2: Are the screwdriver bits standard or proprietary?
The bit socket uses a standard 1/4″ (6.35mm) hex shank — the same interface as common power tool bit sets. The two included bits (Phillips PH2 and flathead, 25mm length) are replaceable with any standard 25mm 1/4″ bit. This means retail buyers can market the tool as compatible with widely available replacement bits, which is a practical differentiator over fixed-function pry bars.

Q3: What is the MOQ for custom laser-engraved versions?
Stock items (sandblasted, no logo) have a MOQ of 50 pcs. Custom laser engraving (brand logo or text on the flat body panel) requires MOQ 500 pcs per SKU. Custom surface finishes (stone wash, titanium burn) also require 500 pcs per finish. Mixed-SKU negotiations are available for importers placing multi-model orders.

Q4: What surface finish options are available beyond sandblasting?
Three additional options are supported: stone wash (tumble-finished, subtle surface texture), titanium burn / heat anodizing (blue-gold-purple gradient from heat treatment — no dye, no coating), and natural machined finish (bare CNC surface). All are integral surface treatments, not coatings, and do not peel or wear through under normal EDC use conditions.

Q5: Is the tool TSA or airline carry-on compliant?
This depends on the destination market’s regulations and how individual security officers classify multi-function pry tools at inspection. The tool contains no blade. However, procurement teams sourcing for travel accessory retail channels should verify carry-on compliance with their target market’s aviation authority before listing it as travel-safe in product copy.

Q6: What packaging is available for retail brands?
Standard packaging is an OPP bag with the two included bits. Retail-ready options include individual hang-tag cards (custom print), kraft paper gift boxes, and private label insert cards. For brands wanting the bits packaged separately in a small labeled pouch, that option is available at MOQ 500 pcs.

Q7: Can the overall dimensions or geometry be modified for ODM orders?
Yes, with tooling cost. The current body (143mm × 22.5mm × 7mm) can be resized — shorter variants (~110mm) are feasible within the Grade 5 titanium CNC machining process. DFM (design for manufacturing) review is included before tooling confirmation. ODM minimum is typically 1,000 pcs given tooling investment.